Friday, December 27, 2013

Trouble shooting Wi-fi hotspot problems


Persistent trouble with linking to a Wi-Fi, the network adaptor may not be recognizing wi-fi. Above the number keys is a row of keys where a key with a wif-fi symbol. There should be light indicator telling you if it is off or on. If the indicator is red the network adaptor is switched off. Pressing the key will switch it on the indicator changing to green or blue.

If on doesn't mean will recognize wif-fi because the computer may have been started with the network adaptor switched off.  Every time you open your operating system's browser will be looking in the host sever by wire connection not connected anyway so will display the page cannot be display or not connected to the internet page.

To recognize the wifi signal at this point if off turn on the wif-fi key leaving it on shutting down the computer. Restarting it the adaptor may then recognize the wi-fi signal.

There are all sorts of things going on behind the scenes that can upset the connection. For one, policies of the provider can be a very week signal often influenced by public concern of radiation poising believe to cause brain tuners keeping single strength down often effected by walls and furniture specially environment never originally intended for a hot spot reducing signal strength.

On top of this the pick up sensitivity of your computer may not help either. Cold corners are often created by the computer sensitivity in the hot spot location or caused by a busy drain on the providers resources reducing the signal strength bellow the computers pick up sensitivity.

Your computer can't find signal because the providers strength. Either the service provider is busy or caused to drop bellow the sensitivity of your computer. When the browser does manage to log on it is then intermit caused by a drain on their resources why your computer will have problems.

When the page cannot be displayed is instant there is no signal at all often caused by the user forgetting to switch on the wi-fi. If the computer spends far to much time searching is a sign the connection is at lest open but service provider is busy by a drop in signal strength by a drain on it's resources.

A drain on signal strength hot spots literally mean hot and cold corners inside a hop spot location effected by the position of walls and furniture and distance the signal week enough to be effected why your computer has problems with different corners.

A cold corner can also be the effect of not enough signal strength to overcome any barriers and distance often bellow the minimum threshold required for your computer. The computer searches for every for the busy signal . In other words the browser can't help but stop working after a few minutes display the page cannot be displayed page. If a corner is barely operating your browser will be unstable in the middle of your browsing.

The worst when the signal strength drops out your computer struggles to reestablishing the connection drops out again when the computer had just reestablished the link. This is a time when the service provider is very busy today. Week signals below your computer's sensitivity corners is tricky to stick with often forced to move away from walls, enclosed cubicles or furniture or a find a direct line with the signal.

The worst forced to wait a few minutes to try again. When a corner does work we have found the most efficient corner or wait untill the service provider is not so busy

If you're observant other people on line close by can play a part in signal drain reducing strength further too. Barely operating corners have no tolerance for incorrect address, spelling errors, because not enough power in the corner to maintain the auto correction properly. 

No comments:

Post a Comment